The key is almost always displayed on the first screen you see when you boot your computer up and is also listed in the manual that was supplied with your system. The key that you need to press to enter these settings depends on the manufacturer of your computer’s motherboard and can be anything from Esc, Delete or F2 to F8, F10 or F12. However, while this test may be simple and straightforward, be warned as it is not entirely conclusive and that you will most likely also have to use Method 2 to be sure of your HDD’s status.Įnter your computer’s BIOS (or UEFI) settings as soon as it starts up. The simplest method that you can use to determine whether or not your Hard Disk Drive has failed or is failing is to see whether or not the drive shows up in your computer’s BIOs settings. The following are the two most effective methods that you can use to check if your HDD has failed or is failing: Method 1: Check to see if the drive is visible in BIOS settings # This is why you need to be sure that your HDD has failed or is failing before you attempt to repair the problem or replace the HDD. Also, getting a replacement for a failed or failing HDD can cost a substantially large amount of money. However, a failed or failing Hard Disk Drive is not the only thing that can keep a computer from booting into its Operating System as it should.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |